Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€25.00

Real wood veneer on acoustic felt

Acoustic panel Natural Oak

260 × 60 cm
4,8688 reviews
Black Friday−44%
was €72.95€40.76incl. VATyou save €32.19€47.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Available from early DecemberWe will dispatch as soon as it arrives

Size:

260 × 60 cm€47.95
300 × 60 cm€74.95

Also available in Brown Oak and Smoked Oak

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Natural Oak acoustic panel for an oak slat wall with less echo

The Natural Oak acoustic panel is a wooden slat wall for indoor use that reduces echo in the room. Each slat is made of MDF with a thin layer of real oak veneer on top and is fixed to acoustic PET felt. Per panel that is 260 x 60 cm, 18 mm thick and 10 kilos. For a high wall, the same colour is also available in 300 cm.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight10kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: available from early December.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • Does Natural Oak suit your interior?

    One buyer of Natural Oak combined the panels with green walls around them and finds that they look really good there. Another found them easy to fit with adhesive and sees no colour difference. Real wood veneer gives every colour its own grain and warmth, and you see that best in real life. So order a sample first, from 2 euros per sample and sent free of charge. Torn between Natural Oak and another shade? Then order both.

  • Cutting without the slats shifting

    One buyer cut Natural Oak to size with an ordinary hand saw. This buyer's tip: clamp the panel between two boards with wood clamps, so the slats do not move while you saw. Cut-outs for sockets worked with a jigsaw and a Stanley knife. Preferably use a fine-toothed saw and wear eye protection.

  • How many panels do you need?

    One panel of 260 x 60 cm covers 1.56 m². For fixing you need half a tube of adhesive per panel, or else one bag of screws. Would you rather not do the maths yourself? The calculator with the panel works out panels, end strips and fixing materials for you. For more than 40 pieces, you request a quote.

  • What Natural Oak does against noise

    The felt on the back absorbs sound and reduces echo in the room. Because it absorbs sound waves from the front and the back, it also helps against noise from the neighbours. One buyer of Natural Oak writes that the worst of the neighbours' noise has gone and that they could now hold sound baths there. A wall panel does not stop sound that comes in through windows and doors.

Natural Oak acoustic panel in real life

30 photos and 1 video from 24 reviews of this panel

Reviews

What customers think of this product

4,86Excellent

Based on 88 reviews

Mayra

November 15, 2026

Excellent service, fast delivery and good quality. I thought it looked beautiful on my wall, it gives it a more chic touch.

Translated from Dutch

Henry

November 15, 2026

Nice panels, with a relatively thick felt layer on the back. The panels are easy to work with and give your room a nice look. Delivered quickly and a reasonable price.

Translated from Dutch

Anoniem

November 3, 2026

It turned out really nice, it's easy to work with and it does what it promises.

Translated from Dutch

Kjw

October 25, 2026

Great panels..easy to install even for someone with two left hands

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

Yes, choose 300 x 60 cm under size. That length weighs 11.5 kilos per panel, compared with 10 kilos for 260 cm.

Only where the wall does not end in a corner. Otherwise you would see the protruding felt and the side of the last slat there. The end strip, a solid L-profile, is the same colour as the panel.

Dust the panel regularly with the vacuum cleaner or a soft brush. For dirt that will not come off, use a cloth that is slightly damp and well wrung out.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Acoustic panel samples

Which colour suits your interior?

Real wood veneer on felt: every colour has its own grain and warmth. Put the samples next to your floor and furniture and choose with confidence.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Torn between two shades? Order both.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€47.95€72.95You save €25.00