Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€25.00

Real wood veneer on acoustic felt

Acoustic panel Smoked Oak

260 × 60 cm
4,7726 reviews
Black Friday−44%
was €72.95€40.76incl. VATyou save €32.19€47.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Available from early DecemberWe will dispatch as soon as it arrives

Also available in Brown Oak and Natural Oak

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Smoked Oak acoustic panel for a clean slat wall

The Smoked Oak acoustic panel clads an interior wall with clean wooden slats and reduces the echo at the same time. The panel is 18 mm thick, weighs 10 kilos and measures 260 x 60 cm. Each slat is 27 mm wide: MDF with a top layer of real wood veneer. Between the slats you see 13 mm of recycled PET felt each time, which is 9 mm thick.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight10kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: available from early December.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • How does Smoked Oak look on the wall?

    Smoked Oak gets an average of 4.74 stars from 23 reviews. One buyer is very happy with the clean wall panels and finds the Smoked Oak colour beautiful. Another calls them good quality and sturdy, with real wood on felt. One small drawback from a buyer: on shorter cut pieces, too few staples hold the slats in place. Place the shade next to your floor yourself with a sample: from 2 euros per sample, sent free of charge.

  • From wall width to number of panels

    One panel is 60 cm wide and covers 1.56 m². For a wall 2.4 metres wide, you place 4 panels side by side. For gluing you allow 1 tube of adhesive per 2 panels, for screwing 1 screw set per panel. If your wall is lower than 260 cm, cut the panels to size with a fine-toothed saw and wear eye protection. The calculator works out panels, end strips and fixing materials for you. Above 40 pieces, you request a quote.

  • The Smoked Oak end strip

    If your wall does not end in a corner, you see the felt and the side of the last slat there. The Smoked Oak end strip fits over it: a solid L-profile 260 cm long and 18 mm high, exactly the thickness of the panel. Allow one per visible end and one per corner you take the panels round. Glue it with thin mounting adhesive or sealant, not with High Tack. It cannot be screwed.

Smoked Oak acoustic panel in real life

9 photos from 7 reviews of this panel

Reviews

What customers think of this product

4,77Excellent

Based on 26 reviews

Rogier

October 19, 2026

Beautiful!!! Installing the panels was also very easy, finished the whole wall within 1 hour!

Translated from Dutch

Carla

July 6, 2026

Turned out beautiful! Very satisfied with the service & delivery.

Translated from Dutch

Ferry Van der Elburg

May 12, 2026

Great material

Translated from Dutch

Martin

April 20, 2026
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

Yes. The LED strips fit on panels with standard slats, such as Smoked Oak, and not on wide slats. A strip is 260 cm long and you only shorten it at the black cutting lines, every 5 cm.

Take photos straight away and email them within 2 working days to [email protected]. You will then receive a replacement panel, or another solution will be found.

No. The panel is intended for indoor use and is not suitable for damp rooms such as bathrooms, shower rooms or saunas. For outdoors, there is composite cladding.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Acoustic panel samples

Which colour suits your interior?

Real wood veneer on felt: every colour has its own grain and warmth. Put the samples next to your floor and furniture and choose with confidence.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Torn between two shades? Order both.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€47.95€72.95You save €25.00