Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
Installation

Install it yourself, without the hassle

All our panels are designed for you to install yourself. Below you will find the steps, the tools and the PDF guide for each product. Stuck? Give us a call and we will go through it with you.

What you need Tape measure and spirit level Drill or screwdriver Handsaw or mitre saw Sealant gun (for mounting adhesive)
Acoustic panelsA 3 metre wall in an afternoon

Acoustic panels

Two ways: with the High Tack mounting adhesive (quick, on any surface) or with screws (the strongest, no adhesive residue).

  1. 1Make the wall clean and flat
  2. 2Set the first panel level
  3. 3Apply adhesive in beads or screw through the felt
  4. 4Fit the panels edge to edge, end strip as the finish
Composite claddingA 20 m² façade in one weekend

Composite cladding

Rhombus, wide boards and shiplap are installed on aluminium battens with the hook-in system. No visible screws.

  1. 1Screw aluminium battens onto the façade (40 to 50 cm centres)
  2. 2Fit the starter profile level at the bottom
  3. 3Hook the panels in from bottom to top and fix them
  4. 4Corner and closure trims as the finish
SPC wall panels and brick slipsA bathroom wall in a few hours

SPC wall panels and brick slips

SPC panels click together and hang on an aluminium profile. Self-adhesive brick slips stick directly onto a flat, clean wall.

  1. 1Make the wall flat, dry and dust-free
  2. 2Fit the starter profile level
  3. 3Click the panels in or press the strips on
  4. 4Finish corners and edges with trims
Advice

Help with installation

Call or email us for advice on quantities, substrate and finishing.

  • Free installation advice by phone
  • All profiles and installation materials from stock
  • Showroom in Oirschot to see it before you start