Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€10.00

Installation · box of black screws

Box of black screws - 100 pieces

4,851,658 reviews
Black Friday−32%
was €49.95€33.96incl. VATyou save €15.99€39.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysIn stock
  • Black stainless steel cross-head screws
  • Disappear into the black felt
  • 12 screws per panel
  • Delivered from our own stock
Lowest price guarantee
Delivered from our own stock
Easy to install yourself

Product information

Box of black screws - 100 pieces

Black stainless steel screws with a cross head. Thanks to the cross head, the screw does not sink into the PET felt, so the fixing stays tight and the screw head disappears neatly into the black felt.

Allow one bag of 12 screws per panel. For larger projects, the box of 100 screws is better value.

Technical data

Material
A2 stainless steel
Length
24 mm
Drive
Cross head
Colour
Black
Quantity
100 pieces

About this product

Black screws for acoustic panels: the box for a whole wall

This box contains 100 black screws for acoustic panels, enough to screw a wall of just over eight panels in place. Each screw is A2 stainless steel, 24 mm long and has a cross head. That cross head stops the screw sinking into the PET felt, so the fixing stays tight.

  • How many boxes do you need for your wall?

    Allow twelve screws per panel. Four panels need 48 screws and eight panels 96: both fit in one box. Nine panels need 108 screws, so one box plus one bag of 12, or two boxes. Sixteen panels need 192 screws: that is two boxes. So multiply your number of panels by twelve. If you end up just over a hundred, top up with a bag or an extra box.

  • Box of 100 or separate bags of 12?

    The box of 100 and the bag of 12 contain exactly the same screw. Only the number per pack differs. For one panel a bag of 12 is enough. For larger projects the box of 100 is better value. Because the screw is the same, you can mix boxes and bags on the same wall. If you add one panel later, a single bag will do.

  • Installing acoustic wall panels with these screws

    Line the panel up along a marked line and check with a spirit level that it is straight. Then screw between the slats through the felt into the wall, spread over the height of the panel. On a brick or concrete wall, drill pilot holes first and fit wall plugs. Tighten until the head just disappears into the felt: turning further pulls the felt in. The black head only disappears on panels with black felt. The installation guide with screws is available as a PDF with the product.

Installation

How to screw the panels in place

  1. 1

    Hold the panel against the wall and line it up with the marked line.

  2. 2

    Check with the spirit level that the panel is straight.

  3. 3

    Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.

  4. 4

    On a brick or concrete wall, drill pilot holes first and insert wall plugs.

  5. 5

    Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.

How many you need

  • Twelve screws per panel.
  • A box of 100 is enough for just over eight panels.
Installation guide with screws (PDF)

Reviews

What our customers say

4,85Excellent

Based on 1,658 reviews

Our panels in real life

Customer projects with our acoustic panels

FAQ

The questions customers ask us most often about this product.

Twenty panels need 240 screws. That is three boxes of 100, or two boxes plus four bags of 12.

You fix the panels with screws through the felt, with High Tack mounting adhesive or with both. Allow half a tube of mounting adhesive per panel.

On the standard acoustic panels there is 13 mm between the slats. On the panels with wide slats it is 9 mm.

Twelve per panel. For larger projects, the box of 100 screws is better value.

No. The screws are black and disappear into the black felt between the slats.

No, screws cannot go into the end strip. You glue it with a thin mounting adhesive or sealant.

Delivery, collection and returns

This is how this product reaches you, and how collection by appointment works.

Delivery

  • Netherlands and Belgium: €7.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Aalsmeer, by appointment only.
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.