Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€25.00

Real wood veneer on acoustic felt

Brown Oak acoustic panel

260 × 60 cm
4,9135 reviews
Black Friday−44%
was €72.95€40.76incl. VATyou save €32.19€47.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysOnly 38 left in stock

Size:

260 × 60 cm€47.95
300 × 60 cm€74.95

Also available in Smoked Oak and Natural Oak

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Brown Oak acoustic panel: a warm wooden wall behind the TV or the bed

The Brown Oak acoustic panel turns a bare interior wall into a warm brown slat wall that also reduces the echo in the room. Buyers hung it behind the television and in the bedroom. One panel measures 260 x 60 cm and weighs 10 kilos. Each slat is MDF with real wood veneer and rests on a 9 mm layer of acoustic PET felt.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight10kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • Real wood, not a print

    The veneer on the slats is a thin layer of real wood, so you see real wood grain. One buyer writes that it is not a stick-on sheet, but a real wood look that is easy to work with. The slats are 27 mm wide and 9 mm thick, with 13 mm of space between them. The felt underneath absorbs sound waves and is made from recycled PET.

  • One colour in two lengths, with its own end strip

    Brown Oak comes in 260 x 60 cm and in 300 x 60 cm. The long version weighs 11.5 kilos and is intended for higher walls, with fewer joins between the panels. Both lengths have a basic end strip in Brown Oak, 260 or 300 cm long, 27 mm wide and 18 mm high. Not sure about the shade next to your floor? Then order a sample first: from 2 euros per sample, sent free of charge.

  • How many panels for a 180 cm TV wall?

    One panel covers 1.56 m². For a TV wall about 180 cm wide, you place 3 panels side by side, 4.68 m² in total. If that wall does not end in a corner on one side, an end strip goes there. The calculator with the panel includes the end strips automatically. For 3 panels you buy 2 tubes of mounting adhesive, as you allow half a tube per panel. If you screw, it is 3 bags of 12 screws.

Brown Oak acoustic panel in real life

7 photos from 6 reviews of this panel

Reviews

What customers think of this product

4,91Excellent

Based on 35 reviews

Patrick

November 15, 2026

Good product and easy to mount.

Translated from Dutch

Ahlam

November 6, 2026

The acoustic wall panels really finished off my interior. Looks nice. Colour exactly like in the photo. Easy to work with. Delivery went great and super fast. 10/10

Translated from Dutch

Caroline

October 11, 2026

Nicely finished! From a boring plain white wall to great quality and service

Translated from Dutch

Leo

June 11, 2026

Extremely satisfied

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

Yes, Brown Oak has standard slats, and the LED strips fit on those. You start with the starter kit: one 260 cm strip, an adapter and a remote control. You can connect up to six strips to that adapter.

Yes. One buyer of this panel calls it easy to fit. You fix it with mounting adhesive, with screws between the slats, or with both. Do check for pipes and wiring before you drill into the wall.

No. The panel is intended for indoor use and not suitable for damp rooms. For outdoors, including under a canopy, choose composite cladding.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Acoustic panel samples

Which colour suits your interior?

Real wood veneer on felt: every colour has its own grain and warmth. Put the samples next to your floor and furniture and choose with confidence.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Torn between two shades? Order both.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€47.95€72.95You save €25.00