Acoustic panel accessories

Akupanel accessory · LED strips
Akupanel accessory | LED strips
€74.95
Black Friday€63.71with BF26
You save €11.24Available from mid-December
Acoustic panel accessory · Wall shelf
Acoustic panel accessory | Wall shelf
€49.95
€77.95Black Friday€42.46with BF26
You save €35.49Delivered within 1-5 working days
Akupanel accessory · Hook
Akupanel accessory | Hook
€14.95
Black Friday€12.71with BF26
You save €2.24Delivered within 1-5 working days
Akupanel accessory · Single LED strip without adapter
Akupanel accessory | Single LED strip without adapter
€49.95
€79.95Black Friday€42.46with BF26
You save €37.49Available from mid-December
High Tack mounting adhesive
High Tack mounting adhesive
€10.95
Black Friday€9.31with BF26
You save €1.64Delivered within 1-5 working days
Black screw set - Acoustic panel - 12 pieces
Black screw set - Acoustic panel - 12 pieces
€5.95
Black Friday€5.06with BF26
You save €0.89Delivered within 1-5 working days
Box of black screws - 100 pieces
Box of black screws - 100 pieces
€39.95
€49.95Black Friday€33.96with BF26
You save €15.99Delivered within 1-5 working daysAcoustic panel accessories: lighting, hanging and fixing
Acoustic panel accessories come in two types: extras for your wall and fixing materials. The extras are LED strips, a wall shelf and a hook. They fit panels with standard slats, not panels with wide slats. For installation, choose High Tack mounting adhesive or black screws.
LED strips for your slat wall: starter kit or single strip
Start with the starter kit: an LED strip with adapter, remote control and 2 metres of cable. You can connect up to six strips to one adapter, so you decide how many strips your slat wall gets. The separate LED strip, without adapter and remote control, extends a set like this. Each strip is 260 cm long, is 20 W and gives warm light of 3000 K.
Wall shelf and hook: sizes and material
The black wall shelf measures 52 x 14 x 9 cm and is designed for displaying decorations. It is made of powder-coated galvanised steel, and two black screws come with the set. The hook is made of the same material, with a 17 x 4 cm hook and a knob 8 cm in diameter.
High Tack mounting adhesive: one tube for two panels
High Tack is an MS polymer adhesive with extremely high initial grab. This means a panel holds immediately and does not need to be supported while it cures. The adhesive is strong enough for panels on the ceiling. Allow half a tube per panel. A nozzle is included.
Black screws: 12 per panel
If you would rather screw acoustic wall panels, use the black A2 stainless steel 24 mm screws with a cross head. Thanks to that cross head, the screw does not sink into the PET felt. You use 12 screws per panel: a bag of 12 is for one panel, a box of 100 for more than eight panels. In brick or concrete, pre-drill and use wall plugs.
FAQ
Can I shorten the LED strip?
Yes, on the black cutting lines every 5 cm. Only cut on those markings and you will shorten the strip correctly and safely.
How do I connect the LED strips?
Connect each strip to the adapter from the starter kit and control the lighting with the remote. The full steps are in the installation guide (PDF).
Do I need to drill into the wall for the wall shelf or hook?
No. You fit the ratchet into the panel and screw the threaded knob into it. That way they are held in the panel itself.
Which versions of the hook are available?
Three: with a wooden knob in black-painted oak, with a metal knob, or just the knob without the hook.

