John B.
Nice quality with wood veneer on 3 sides. Nice round corners. Looks very good.
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits our acoustic panels with standard slats.
This product contains only an LED strip, without adapter and remote control. This product does not fit on the acoustic panels with wide slats.
Product information
This is a single LED strip to extend your set. It does not come with an adapter or a remote control. If you do not have them yet, choose the LED strips starter kit. You can connect up to six strips to an adapter from that kit.
The LED strip is easy to shorten. There is a black cutting line every 5 cm. Only cut on these markings to shorten the strip correctly and safely.
Please note: This product contains only an LED strip, without adapter and remote control. This product does not fit on the acoustic panels with wide slats.
About this product
This single LED strip is an extra line of light for your acoustic wall, intended for anyone who already has the LED strips starter kit. You get only the strip, without adapter and without remote control. You connect it to the adapter from your starter kit. Length, power and light colour are the same as the strips you already have: 260 cm, 20 W and 3000 K warm light.
You can connect a maximum of six strips to one adapter, including the strips from your starter kit. If you chose the starter kit with one strip, you can add five more. If you ordered the kit with three strips, three more. If your adapter already has six, no more strips can be added to that same adapter. So first count how many strips are on your adapter now.
Hold the new strip with the wire end at the top and press it into a groove between two slats. Run the wire to the back of the panel so it stays out of sight. Then connect the strip to the LED driver you already have. According to the installation manual, the plug only goes into the socket after that. You control the new line of light with the remote control from your starter kit.
The single LED strip is 260 cm long and can be shortened in steps of 5 cm. The cutting marks are black and repeat every 5 cm. Only cut at one of these marks, because that is the only place where you can shorten the strip correctly and safely. Because you shorten each strip separately, the new line of light can be shorter than the strips already on your wall.
Installation
Shorten the strip if needed on a black cutting line (every 5 cm).
Connect the strip to the adapter from the starter kit.
You can connect up to six strips to one adapter.
Reviews
Based on 1,658 reviews
John B.
Nice quality with wood veneer on 3 sides. Nice round corners. Looks very good.
Translated from DutchLamers
After we had ordered a few samples and received them, we still decided to pick up the panels ourselves so we could see the panels in their entirety ourselves. No regrets, we discovered the three-sided covered slats (a bit thicker) and a different color. Are very happy with them, even the ‘sound’ in the room sounds different.
Translated from DutchLenneke
Great
Translated from DutchRene
Ordered on a Wednesday and delivered Saturday. Amazed by the quality. Very good quality and the wood veneer also very nice.
Translated from DutchCustomer projects with our acoustic panels
The questions customers ask us most often about this product.
No, you also need an adapter and a remote control, and they are not in the box. If you do not have them yet, choose the LED strips starter kit. It contains 1 to 6 strips of your choice, plus the adapter and the remote control.
No, it does not fit between wide slats. The single strip belongs in our panels with standard slats, just like the strips from the starter kit.
Unplug the driver from the socket for 10 seconds. Plug it back in and press SET UP on the remote control. If the strip then starts flashing, the remote control is paired again; sometimes this takes a few attempts.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.