Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s

3-sided acoustic panels

3-sided acoustic wall panels: the side of every slat finished too

3-sided acoustic wall panels are covered in wood veneer on three sides: as well as the front, the side of every slat is finished too. The 3-sided version comes in Naturel Oak and Mocha, both 260 x 60 cm. The panels reduce echo at home and you fit them yourself.

What makes 3-sided different from a standard panel

The difference is in the slats. On 3-sided they are 12 mm thick instead of 9 mm. As a result the panel measures 21 mm, compared with 18 mm for the standard range. It weighs 11.5 kg, whereas a standard 260 cm panel comes to 10 kg. Slat width, spacing and felt are the same for both.

Naturel Oak, Mocha or Snow

The panels with 3-sided in their name come in two colours: Naturel Oak and Mocha. Each has an end strip with the same colour name. Snow, the third panel in this category, has white felt and its own Snow end strip. If you are torn between the two wood colours, order a sample of both: from 2 euros per sample, sent free of charge.

How many panels for your wall

A panel covers 1.56 m² and hangs upright. So you count 60 cm columns across the width: at 3 metres wide and up to 260 cm high, that is 5 panels. If the same wall is 280 cm high, you need two panels per column, 10 in total, because 3-sided only comes in 260 cm. You can do it in one length with the 3 metre panels from the standard range.

Installing and finishing

Use the spirit level to mark a vertical line for the first panel. If you are working with adhesive, check straight away with the spirit level that the panel is straight. You can only adjust it while the adhesive has not yet bonded. Screws go through the felt between the slats. You finish a free end of Naturel Oak or Mocha with a 27 x 21 mm end strip, exactly as high as the panel is thick. You glue it, because screws cannot be used in an end strip.

FAQ

Can you see acoustic panels in real life before you order?

Yes, in the showroom in Oirschot. Almost the entire range is on display at full size, and you can walk in without an appointment.

How can you see the difference from a standard panel?

As well as your 3-sided sample, order a sample of Brown Oak or Walnut from the standard range and lay them side by side. You only really see the finished side of the slats once you have the sample in your hand.

What is the gap between the slats?

13 mm. The slats are 27 mm wide and sit directly on a single 9 mm layer of felt.