Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€29.00

Real wood veneer on acoustic felt

Acoustic panel Snow, white felt

260 × 60 cm
4,7924 reviews
Black Friday−39%
was €98.95€59.46incl. VATyou save €39.49€69.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysIn stock

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Acoustic panel white felt: Snow keeps your wall light

The Snow white felt acoustic panel has white slats on a layer of white acoustic felt. It is designed to reduce echo with a wall that stays completely light. The panel measures 260 by 60 centimetres, is 18 millimetres thick and covers 1.56 square metres. Buyers give it 4.79 out of 5 from 24 reviews.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight10kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • What makes Snow different from the other colours?

    With Snow, the slats and the felt are both white. In the 13 millimetre openings between the slats you see white felt, not a dark line. That way the whole wall stays one light shade, with only the relief of the slats. Each slat is 27 millimetres wide and 9 millimetres thick. One buyer describes the colour as true white.

  • How much echo does the white felt remove?

    The felt behind the slats is 9 millimetres thick. It absorbs sound waves and so shortens the reverberation in the room. The measured sound absorption is set out in a test report. The felt also helps against noise from the neighbours, although that noise also comes in through windows and doors.

  • What is Snow made of and how do you clean it?

    The slats are MDF with a white finish. The acoustic felt is made from recycled PET plastic. Dust the wall regularly with a soft brush or the vacuum cleaner. For a more thorough clean, use a slightly damp, well wrung-out cloth.

  • How do you fit a 260 centimetre panel?

    You fit Snow vertically and glue it with High Tack mounting adhesive, half a tube per panel. Screws are also possible: one set of 12 per panel. If the wall does not end in a corner, an end strip in the colour Snow finishes off the protruding felt.

Acoustic panel Snow in real life

9 photos and 1 video from 7 reviews of this panel

Reviews

What customers think of this product

4,79Excellent

Based on 24 reviews

Leo

January 20, 2026

On the site, among others for the Snow type, extensive information is given about the quality, it mentions 0.45 mm wood veneer on which the wood structure is recognizable. The Snow type that we ordered turned out to be MDF with plastic foil, so you're still being misled. Maybe an adjustment and clarification of the product information? Quality, packaging and delivery were excellent.

Translated from Dutch

hatice goren

January 8, 2026

Superr

Translated from Dutch

J.E. ten Berge

November 27, 2025

See above

Translated from Dutch

Carla

November 18, 2025

Nice and quick result to hide cracks in plasterwork

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

Count one strip for every 60 centimetres of wall width, rounded up. If the wall is higher than 2.60 metres, each strip takes two panels. Add 5 percent spare for cutting waste, with a minimum of 1 panel. So a wall of 3 by 2.50 metres needs 5 panels plus 1 spare. The calculator with this panel works it out and also includes the end strips.

Yes. You can order a sample from 2 euros, delivered free. You can also visit the showroom in Oirschot without an appointment.

Take photos straight away and email them within 2 working days to [email protected]. You will then receive a replacement panel or another solution.

No. Snow is intended for indoor use and is not suitable for damp rooms such as bathrooms, shower rooms or saunas. For outdoors, there is composite cladding.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

3-sided acoustic panel samples

See the 3-sided veneer in real life

On the 3-sided panels, the side of each slat is finished too. You only really see this when you hold the sample in your hand.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Compare with the standard range: also order a sample of Brown Oak or Walnut.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€69.95€98.95You save €29.00