Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€40.05

Real wood veneer on acoustic felt

Acoustic wall panels 3-sided Mocha

260 × 60 cm
4,8938 reviews
Black Friday−45%
was €110.00€59.46incl. VATyou save €50.54€69.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Available from mid-DecemberWe will dispatch as soon as it arrives

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

3-sided Mocha acoustic wall panels for a wall or boxing-in

3-sided Mocha acoustic wall panels are slat panels for indoor use, with real wood veneer on the front and both sides of every slat. They reduce echo and clad a wall or a boxing-in. A panel measures 260 by 60 centimetres, is 21 millimetres thick and weighs 11.5 kilos. Buyers give it 4.88 out of 5, from 32 reviews.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600 × 600 × 21 mm
Felt thickness9mm
Slat thickness12mm
Slat width27mm
Gap between slats13mm
Weight11.5kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: available from mid-December.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • Where do you hang 3-sided Mocha?

    You hang 3-sided Mocha as a TV wall, as a headboard in the bedroom, in the living room or dining room, or behind a piano. The sides of the slats, in the 13 millimetre gaps, are also covered with veneer. Buyers call the look stylish; one of them writes that the living room got a real upgrade.

  • Cladding a boxing-in: include the end strips

    After getting advice, one buyer clad an MDF boxing-in with these panels and reports that they are exactly 60 centimetres wide. For a boxing-in or a wall that does not end in a corner, include the end strips in advance: one per visible end and one per corner the panels go round. The Mocha end strip is a solid L-profile in the same colour, 21 millimetres high, that fits over the protruding felt.

  • How the panel is built up

    The slats are MDF with wood veneer, 27 millimetres wide and 12 millimetres thick, compared with 9 for the standard range. They sit directly on 9 millimetres of recycled PET felt. On one side the felt sticks out, on the other side the last slat overlaps it. This way the panels join tightly.

  • Hanging and cleaning

    If you glue with the High Tack mounting adhesive, one tube is enough for two panels. If you screw, you drive 12 black stainless steel screws per panel between the slats into the wall; the heads disappear into the felt. Dust with a soft brush or vacuum cleaner, and for more thorough cleaning use a well wrung-out damp cloth.

3-sided Mocha acoustic wall panels in real life

29 photos and 1 video from 19 reviews of this panel

Reviews

What customers think of this product

4,89Excellent

Based on 38 reviews

John B.

July 31, 2025

Nice quality with wood veneer on 3 sides. Nice round corners. Looks very good.

Translated from Dutch

Lamers

November 21, 2026

After we had ordered a few samples and received them, we still decided to pick up the panels ourselves so we could see the panels in their entirety ourselves. No regrets, we discovered the three-sided covered slats (a bit thicker) and a different color. Are very happy with them, even the ‘sound’ in the room sounds different.

Translated from Dutch

Louis

November 17, 2026

Fast, neat delivery and top quality!

Translated from Dutch

Rene

November 17, 2026

Ordered on a Wednesday and delivered Saturday. Amazed by the quality. Very good quality and the wood veneer also very nice.

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

Allow one panel per 60 centimetres of wall width; one panel covers 1.56 square metres. So a wall 3 metres wide and up to 2.60 metres high needs 5 panels.

Alongside a sample of Mocha, also order Brown Oak or Walnut from the standard range, from 2 euros per sample and sent free of charge. That way you compare the colour and the side of the slat in your own light. One buyer reports that the panels were the same colour as the sample.

Yes, it helps: the felt behind the slats absorbs sound waves. Noise from the neighbours can also come in through windows and doors, so expect less disturbance, not silence.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
3-sided acoustic panel samples

See the 3-sided veneer in real life

On the 3-sided panels, the side of each slat is finished too. You only really see this when you hold the sample in your hand.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Compare with the standard range: also order a sample of Brown Oak or Walnut.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€69.95€110.00You save €40.05