Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€40.05

Real wood veneer on acoustic felt

Acoustic wall panels 3-sided Naturel Oak

260 × 60 cm
4,8256 reviews
Black Friday−45%
was €110.00€59.46incl. VATyou save €50.54€69.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Available from mid-DecemberWe will dispatch as soon as it arrives

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Naturel Oak acoustic wall panel with finished sides on every slat

The Naturel Oak acoustic wall panel is a 3-sided slat panel for indoor use, for anyone who wants to reduce echo with an oak slat wall. Each slat has real wood veneer on the front and on both sides. So the sides you see between the slats are finished as well. The panel measures 260 by 60 centimetres and is 21 millimetres thick.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600 × 600 × 21 mm
Felt thickness9mm
Slat thickness12mm
Slat width27mm
Gap between slats13mm
Weight11.5kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: available from mid-December.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • How can you see the 3-sided veneer before you order?

    You can see the veneer on the sides best with a sample in your hand. Order one in 3-sided Naturel Oak: from 2 euros per sample, sent free of charge. If you want to compare, also get a sample from the standard range, such as Brown Oak or Walnut, and place the sides of the slats next to each other.

  • What do buyers of Naturel Oak say?

    The panel scores 4.84 out of 5 from 51 reviews. One buyer writes that Naturel Oak gave the room a completely new look. Another calls the panels neat and solid. A third fitted them themselves with a sharp power saw and a good sealant gun; after that it was mainly a matter of measuring carefully.

  • How many panels and how much installation material do you need?

    You calculate in columns 60 centimetres wide, up to 2.60 metres high. A wall of 4.20 by 2.50 metres is 7 columns, with each panel shortened by 10 centimetres. Cut with a fine-toothed saw and wear eye protection. The calculator adds 1 panel for cutting waste, so you order 8. That comes with 4 tubes of mounting adhesive or 8 bags of 12 screws. The calculator also includes the end strips.

  • What is the panel made of and how do you keep it clean?

    The slats are made of MDF with a layer of real wood veneer, the acoustic felt behind them from recycled PET plastic. Dust the panels regularly with a soft brush or the vacuum cleaner. For a more thorough clean, use a lightly damp, well wrung-out cloth.

3-sided Naturel Oak acoustic wall panels in real life

37 photos from 21 reviews of this panel

Reviews

What customers think of this product

4,82Excellent

Based on 56 reviews

Lenneke

November 17, 2026

Great

Translated from Dutch

Reinier ten have

November 15, 2026

We are very happy with the panels and glad we chose these. Feels really warm and really finishes off the room. Very easy to mount.

Translated from Dutch

C.j.

November 15, 2026

Super nice panels Heavy duty quality and easy to work with TOP

Translated from Dutch

Christian H

October 31, 2026

Really nice panels for a good price. We're very happy with them.

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

On every corner the panels go round, you glue a Naturel Oak end strip: an L-profile with the same wood veneer as the panel, 21 millimetres high. One buyer writes that the corner finish completes the whole look nicely.

There are 13 millimetres between the slats. Each slat is 27 millimetres wide and sits directly on the acoustic felt.

Take photos of the damage and the packaging straight away and email them within 2 working days to [email protected]. You will receive a replacement panel or another solution. Do not install a damaged panel, as it can no longer be exchanged after installation.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
3-sided acoustic panel samples

See the 3-sided veneer in real life

On the 3-sided panels, the side of each slat is finished too. You only really see this when you hold the sample in your hand.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Compare with the standard range: also order a sample of Brown Oak or Walnut.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€69.95€110.00You save €40.05