Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€40.05

Real wood veneer on acoustic felt

Acoustic wall panel wide slats (50mm) Walnut

260 × 60 cm
4,9314 reviews
Black Friday−45%
was €110.00€59.46incl. VATyou save €50.54€69.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysOnly 231 left in stock

Slats:

Narrow slats€57.95
Wide slats€69.95

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Acoustic wall panel walnut with wide slats: more wood, fewer gaps

This walnut acoustic wall panel with wide slats turns a bare wall into a warm, dark wooden surface with less echo. Slats of 50 millimetres create a calmer look. Underneath the real wood veneer are MDF and a layer of acoustic PET felt. One panel measures 260 by 60 centimetres, is 18 millimetres thick and weighs 14.8 kilos.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600 × 600 × 18 mm
Felt thickness9mm
Slat thickness9mm
Slat width50mm
Gap between slats9mm
Weight14.8kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • What does walnut look like on a wide slat?

    Real wood veneer gives walnut a warm look and a deep colour that does not look washed out, with a wood texture you can feel. A 50 millimetre slat is almost twice as wide as the standard 27 millimetre slat, so you see more continuous wood per slat. Buyers give this panel 4.93 out of 5 stars across 14 reviews. They call it stylish and speak of really beautiful wide boards.

  • Fixing and cutting to size

    Fix the panel with half a tube of High Tack mounting adhesive or with a screw set of 12 black screws. You drive these between the slats through the felt into the wall, spread over the height; the heads disappear into the felt. Cut with a fine-toothed saw. One buyer recommends a laminate saw: the teeth point the other way, so the wooden edge does not splinter. Handle the panels with care and wear eye protection when sawing.

  • How many panels do you need?

    One panel covers 1.56 square metres. In the calculator you enter your wall dimensions and choose one wall, a corner, three walls or all round. If you enter windows and doors, the tool calculates fewer panels for them. It includes end strips: one per visible end and per corner. Need more than 40 panels? Request a quote.

Acoustic wall panel wide slats (50mm) Walnut in real life

3 photos from 3 reviews of this panel, plus 4 photos of other colours

Reviews

What customers think of this product

4,93Excellent

Based on 14 reviews

Paul S.

July 9, 2026

Very good!

Translated from Dutch

Marc

April 5, 2026

For a change these wide slats are also really nice!

Translated from Dutch

Derk van der Woude

January 13, 2026

Very nice and chic

Translated from Dutch

Anoniem

November 24, 2025

Meet expectations. Look nice.

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

No. The LED strips, the wall shelf and the hook from the range only fit on acoustic panels with standard slats. If you want walnut with LED lighting or a shelf on the wall, choose walnut with standard slats.

There are 9 millimetres between the wide slats, and 13 millimetres on walnut with standard slats. Keep this in mind if you want to fix something between the slats yourself.

The Walnut end strip for wide slats, of 50 by 18 millimetres. The regular Walnut end strip is narrower and goes with the standard slat. You glue the end strip in place, as it cannot take screws.

Email photos of the damage within 2 working days to [email protected]; a replacement panel or another solution will follow. One buyer of this panel writes that the damaged panel was exchanged quickly.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

Wide-slat acoustic panel samples

50 mm wide slats, feel the difference

A calmer look, fewer gaps. With a sample you can see exactly how the wide slat works in your room.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Be sure to look in daylight and in lamplight.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€69.95€110.00You save €40.05