Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€40.05

Real wood veneer on acoustic felt

Acoustic wall panel wide slats (50mm) Classic Oak

260 × 60 cm
4,8211 reviews
Black Friday−45%
was €110.00€59.46incl. VATyou save €50.54€69.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysOnly 238 left in stock

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Wide-slat oak acoustic wall panel for a calm wall

This acoustic wall panel with wide slats in Classic Oak is for anyone who wants an oak slat wall with fewer gaps and a calmer look. Each slat is 50 millimetres wide and has a top layer of real wood veneer. The acoustic felt behind the slats reduces echo. The panel measures 260 by 60 centimetres. Buyers give it 4.80 out of 5 stars, based on 10 reviews.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600 × 600 × 18 mm
Felt thickness9mm
Slat thickness9mm
Slat width50mm
Gap between slats9mm
Weight14.8kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • Classic Oak with wide or narrow slats?

    In this version the slats are 50 millimetres wide, with 9 millimetres between them. The standard panel in Classic Oak has 27 millimetre slats with 13 millimetres between them. You can choose that standard panel with brown MDF, black MDF, cream felt or grey felt. One buyer of this panel describes MDF slats with real oak veneer on thick black felt, and says the look on the wall is calmer.

  • Comparing Classic Oak with Walnut and Black Oak

    The 50 millimetre wide slat comes in three colours: Classic Oak, Walnut and Black Oak. Not sure? Then order several colours separately: from 2 euros per sample, sent free of charge. A sample shows you how the wide slat works in your room. Look at the colours in daylight and in lamplight.

  • Materials and care

    A slat is 9 millimetres thick and has an MDF core. The slats sit on 9 millimetres of acoustic felt made from recycled PET plastic, 18 millimetres thick in total. Dust the slats regularly with a soft brush or the vacuum cleaner. For more thorough cleaning, use a slightly damp, well wrung-out cloth.

  • Installing and finishing the side

    A panel weighs 14.8 kilos. You fix it with High Tack mounting adhesive or with screws, which you drive between the slats through the felt into the wall. In brick or concrete, drill first and insert wall plugs. Check beforehand for pipes and wiring with a cable and pipe detector. For a visible end there is the Classic Oak end strip for wide slats.

Acoustic wall panel wide slats (50mm) Classic Oak in real life

2 photos from 2 reviews of this panel, plus 5 photos of other colours

Reviews

What customers think of this product

4,82Excellent

Based on 11 reviews

Anoniem

October 13, 2026

Super nice panels, very dimensionally stable Easy to install and for a sharp price Delivery very fast👍👍👍

Translated from Dutch

Pieter M.

February 5, 2026

sleek panels, nice look

Translated from Dutch

Hopnis

November 10, 2025

Panels with wide MDF slats with real oak veneer on top.Behind that thick black felt..Again something different and a calmer look on the wall.

Translated from Dutch

GA

November 16, 2024

Super nice

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

Allow 1 panel per 60 centimetres of wall width, for a wall up to 260 centimetres high: a wall 4 metres wide needs 7 panels. The calculator then comes to 8, as it includes at least 1 spare panel for cutting waste. The tool deducts doors and windows.

No. The panel is intended for indoor use and not suitable for damp rooms such as a bathroom, shower room or sauna. For outdoors there is composite cladding.

Take photos straight away and email them within 2 working days to [email protected]. You will then receive a replacement panel or another solution.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Wide-slat acoustic panel samples

50 mm wide slats, feel the difference

A calmer look, fewer gaps. With a sample you can see exactly how the wide slat works in your room.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Be sure to look in daylight and in lamplight.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€69.95€110.00You save €40.05