Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€42.00

Real wood veneer on acoustic felt

Acoustic panel Classic Oak, black MDF

260 × 60 cm
4,8571 reviews
Black Friday−50%
was €99.95€49.26incl. VATyou save €50.69€57.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysOnly 175 left in stock

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Acoustic panels oak with black MDF slats

This acoustic panel in Classic Oak with black MDF slats is an indoor slat wall that reduces echo. Each slat has a top layer of real wood veneer and sits directly on 9 mm acoustic felt made from recycled PET plastic. That felt absorbs sound. One panel measures 260 x 60 cm, is 18 mm thick and weighs 10 kilos.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight10kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • Black or brown MDF under Classic Oak?

    With 27 mm slats, the 260 x 60 cm Classic Oak comes in four versions: black MDF (this panel), brown MDF, cream felt and grey felt. With black and brown MDF, the veneer on top is Classic Oak in both cases. The difference is in the colour of the MDF under the veneer. The dimensions and weight are the same: slats 9 mm thick, 13 mm between the slats and 10 kilos per panel.

  • Which end strip goes with black MDF?

    This panel takes the Classic Oak end strip, the same as for brown MDF. It is a solid L-profile 260 cm long, with the same wood veneer and exactly as high as the panel. At the side of each panel, the felt protrudes slightly beyond the last slat. The end strip fits over it and gives the end of the wall a clean finish. You glue it in place.

  • Worked example: a 10 m² wall

    One panel covers 1.56 m². For 10 m², divide 10 by 1.56: that is 6.4, so you order 7 panels. Allow one end strip per visible end and one per corner the panels go round. If you glue with High Tack mounting adhesive, you need half a tube per panel, so 4 tubes. If you screw, you drive 12 black stainless steel screws per panel between the slats through the felt. In brick or concrete, pre-drill first and fit wall plugs. Need more than 40 panels? Request a quote.

Classic Oak acoustic panel in real life

31 photos from 24 reviews of this panel

Reviews

What customers think of this product

4,85Excellent

Based on 71 reviews

Anoniem

October 20, 2026

Very nice panels to work with. The result is more than approved then. Used the panels to cover the back of the cabinet, which serves as a partition wall.

Translated from Dutch

Henk

April 20, 2026

Great panels, and well packaged.

Translated from Dutch

Marc

April 5, 2026

Also a real oak panel, looks great

Translated from Dutch

Wim Parijs

April 4, 2026

Not yet received

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

No, only in 260 x 60 cm. The 300 x 60 cm Classic Oak only comes with brown MDF; that panel weighs 11.5 kilos.

Order a sample of both and place them next to your floor and furniture. Black and brown MDF each have their own sample. You can order a sample from 2 euros, delivered free.

Take photos of the damage and the packaging straight away and email them within 2 working days to [email protected]. You will receive a replacement panel or another solution. Do not fit a damaged panel.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Acoustic panel samples

Which colour suits your interior?

Real wood veneer on felt: every colour has its own grain and warmth. Put the samples next to your floor and furniture and choose with confidence.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Torn between two shades? Order both.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€57.95€99.95You save €42.00