Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€42.00

Real wood veneer on acoustic felt

Grey-Anthracite acoustic panel

260 × 60 cm
4,9146 reviews
Black Friday−50%
was €99.95€49.26incl. VATyou save €50.69€57.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysIn stock

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Grey-anthracite acoustic panel for bedroom, wardrobe wall and ceiling

The grey-anthracite acoustic panel has slats with real wood veneer in a grey shade, on a layer of acoustic PET felt. Buyers use it in the bedroom, behind a wall of wardrobes and even on the ceiling. The panel is 260 by 60 centimetres, 18 millimetres thick and weighs 10 kilos. On average it gets 4.91 stars from 44 reviews.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions2600x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight10kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • Grey in the wood, not just in the gap

    With Classic Oak on grey felt, the slats are oak-coloured and you only see the grey in the gaps. With grey-anthracite, the veneer of the slat itself has a grey tone. Black Oak is the version with black veneer on the slat. So you choose between a grey gap, a grey slat or a black slat.

  • Covering poor plasterwork without a plasterer

    One buyer had a bedroom with plasterwork that had deteriorated and chose these panels instead of a plasterer. The verdict: nicely finished, no tradespeople needed and very doable for an amateur. According to the installation instructions, the wall must still be clean, dry, flat and load-bearing before you start.

  • On the ceiling or behind the wardrobe wall

    One buyer fitted the panels on the ceiling and writes that it gave the room a very stylish look. Another fitted them behind the wall of wardrobes and thinks it looks really good. A third calls the look around the bedside tables stunning. When working overhead, bear in mind the weight of 10 kilos per panel.

  • Working precisely around sockets

    One buyer notes that you have to work very precisely around wall sockets. Measure the cut-out carefully before you saw, and use a fine-toothed saw. Use a cable and pipe detector to check where pipes and wiring run before you drill or screw, and wear eye protection when sawing and drilling.

Grey-Anthracite acoustic panel in real life

19 photos from 14 reviews of this panel

Reviews

What customers think of this product

4,91Excellent

Based on 46 reviews

Jan

October 12, 2026

Fantastic

Translated from Dutch

Anoniem

May 30, 2026

Super nice, we are very happy with our purchase

Translated from Dutch

H. S.

April 11, 2026

Everything delivered on time and correctly

Translated from Dutch

Ineke D.

February 13, 2026

Nice quality

Translated from Dutch
View all reviews →
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

There is a grey-anthracite end strip of 27 by 18 millimetres, matching the slat and the thickness of the panel. You glue it over the protruding felt; screws cannot go into the end strip.

Yes, and then no adhesive residue is left on the wall if you remove a panel later. You screw between the slats through the felt into the wall, with wall plugs for brick or concrete.

It helps, because the felt absorbs sound waves from the front and back. Noise from neighbours often also comes in through windows and doors, so the panel cannot promise complete soundproofing.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Acoustic panel samples

Which colour suits your interior?

Real wood veneer on felt: every colour has its own grain and warmth. Put the samples next to your floor and furniture and choose with confidence.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Torn between two shades? Order both.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€57.95€99.95You save €42.00