Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s
-€21.00

Real wood veneer on acoustic felt

3 metre Acoustic Panel Walnut

300 × 60 cm
4,851,658 reviews
Black Friday−31%
was €109.95€75.61incl. VATyou save €34.34€88.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only 9 left in stock

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysOnly 9 left in stock

Size:

260 × 60 cm€57.95
300 × 60 cm€88.95

Not sure how many panels you need?

Recommended products

Real wood veneer on every slat
Easy to install yourself
Delivered from our own stock
Excellent customer rating

About this product

Walnut 300 cm acoustic panel for a high ceiling

The Walnut 300 cm acoustic panel is the long version of walnut, for a tall wall without stacked panels. It measures 300 by 60 centimetres, is 18 millimetres thick and covers 1.8 square metres. The MDF slats with a top layer of real wood veneer sit on acoustic felt that reduces echo.

Specifications

Product dimensions
MaterialWood veneer, MDF and PET felt
Dimensions3000x600mmx18mm
Felt thickness9mm
Slat thickness9mm
Slat width27mm
Gap between slats13mm
Weight11.5kg
InstallationGlue and/or screw
Materials & care

Materials

The slats are made of MDF with a surface layer of real wood veneer. The acoustic felt behind the slats is made from recycled PET plastic.

Care

Dust the panels regularly with a soft brush or vacuum cleaner. For a more thorough clean you can use a lightly damp, well wrung-out cloth.

Installation & safety

Preparation

  1. Make sure the wall is clean, dry, flat and load-bearing.
  2. Use a cable and pipe detector to check for pipes or wiring in the wall before you drill.
  3. Use a spirit level to mark a vertical line where the first panel will go. Work outwards from that line so the whole row stays straight.
  4. Measure the panels and cut them to size with a fine-toothed saw.

With mounting adhesive

  1. Apply the mounting adhesive in vertical beads to the back of the panel, spread across its width.
  2. Place the panel against the wall and line it up with the marked line.
  3. Now check with the spirit level that the panel is straight. You can only make corrections while the adhesive has not yet set.
  4. Press the panel firmly over its whole surface until you feel the adhesive grip and the panel no longer moves.
  5. Place the next panel tightly against it, so the felt of both panels butts up neatly.
Installation with High Tack adhesive

With screws

  1. Hold the panel against the wall and line it up with the marked line.
  2. Check with the spirit level that the panel is straight.
  3. Screw between the slats, through the felt and into the wall. Spread the screws over the height of the panel.
  4. On a brick or concrete wall, drill pilot holes first and insert wall plugs.
  5. Tighten the screws until the head just sinks into the felt. Do not tighten any further, or the felt will be pulled in.
  6. Place the next panel tightly against it, so the felt of both panels butts up neatly.

With black screws the screw heads disappear into the felt.

Installation with screws

What you need per panel

  • With mounting adhesive: allow half a tube per panel, so one tube of mounting adhesive for every two panels.
  • With screws: allow one bag of screws per panel. For larger projects, the box of 100 screws is better value.
Safety
  • This product is intended for indoor use.
  • Not suitable for damp rooms such as bathrooms, shower rooms or saunas.
  • Wear eye protection when sawing and drilling.
  • Always check for pipes and wiring before you drill into the wall.
Delivery & returns

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Oirschot and Aalsmeer, by appointment only.
  • Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.
  • What does a walnut wall look like?

    Walnut gives you a dark wooden wall. In two customer photos in the webshop, walnut hangs in a dining room and next to a sliding door, there with LED strips as mood lighting. Because the veneer is real wood, you are looking at real grain. One buyer writes that even the wood grain runs through beautifully, another calls walnut a gorgeous colour.

  • At what ceiling height do you choose 300 cm?

    If your wall is 2.60 metres at most, walnut in 260 centimetres is enough. If your ceiling is at 2.75 metres, one 300 centimetre panel covers the full height and you cut 25 centimetres off. The long panel weighs 11.5 kilos, compared with 10 kilos in 260 centimetres.

  • Adhesive or screws for 3 metre walnut

    With High Tack mounting adhesive you allow half a tube per panel, so one tube for two panels. One walnut buyer glued the panels with adhesive to a wall with textured render: the adhesive did what it had to do. Screwing is also possible, with one bag of 12 black stainless steel screws per panel. You drive them through the felt between the slats, where the head disappears. You glue the 3 metre Walnut end strip, because screws cannot be used in it.

  • See walnut at full size in Oirschot

    In the showroom in Oirschot, close to the A58 between Eindhoven and Tilburg, you can see how a 300 centimetre panel looks on a wall. There you can compare walnut in daylight next to oak and black. You can walk in without an appointment. After a visit like that, one buyer quickly made up their mind: walnut. Walnut in 260 centimetres scores 4.91 out of 5 from 137 reviews.

3 metre Acoustic Panel Walnut in real life

37 photos and 1 video from 24 reviews of this panel

Reviews

What our customers say

4,85Excellent

Based on 1,658 reviews

John B.

July 31, 2025

Nice quality with wood veneer on 3 sides. Nice round corners. Looks very good.

Translated from Dutch

Lamers

November 21, 2026

After we had ordered a few samples and received them, we still decided to pick up the panels ourselves so we could see the panels in their entirety ourselves. No regrets, we discovered the three-sided covered slats (a bit thicker) and a different color. Are very happy with them, even the ‘sound’ in the room sounds different.

Translated from Dutch

Lenneke

November 17, 2026

Great

Translated from Dutch

Rene

November 17, 2026

Ordered on a Wednesday and delivered Saturday. Amazed by the quality. Very good quality and the wood veneer also very nice.

Translated from Dutch
Finishing

What is an end strip and when do you need one?

An acoustic panel consists of wooden slats fixed directly onto a single layer of felt. At the side, the felt sticks out slightly beyond the last slat. If your wall does not end in a corner, you will see the felt and the side of the slat there. The end strip is a solid L-profile in the same colour as your panel and exactly the same height. It fits over the protruding felt and gives the end of the wall a clean finish.

  • Same wood veneer and colour as the panel, fixed with the mounting adhesive
  • The calculator at the top automatically includes the end strips
All end strips by colour

Without end strip

The protruding felt and the side of the slat remain visible.

With end strip

The L-profile fits over the felt and finishes the end in the same colour.

FAQ

We have gathered our customers' most frequently asked questions to help you as much as we can.

One buyer wrote that the sample was exactly like the original. This panel has the same sample as walnut in 260 centimetres. You can order it from 2 euros per sample, sent free of charge.

Yes, with a fine-toothed saw; wear eye protection while doing so. One buyer cut walnut to size without any problems using a circular saw.

Up to a wall height of 3 metres, you only count the width. Divide it by 0.6 metres and round up: a wall 3.50 metres wide needs 6 panels. The calculator adds the end strips and the adhesive or screws.

How an acoustic panel is built up

As you can see in the picture, a strip of felt sticks out on the left-hand side of the panel, and on the other side the slat overhangs the felt a little. This means the panels join together perfectly.

The panels certainly help with noise from the neighbours, because the felt is designed to absorb sound waves from the front or back. Do bear in mind that sound does not always come through the wall; it can also come in through windows and doors.
Acoustic panel samples

Which colour suits your interior?

Real wood veneer on felt: every colour has its own grain and warmth. Put the samples next to your floor and furniture and choose with confidence.

  • Sent free of charge, delivered within 2 working days
  • Every colour can be ordered separately
  • 4.85 from 1,658 reviews

Tip: Torn between two shades? Order both.

Tap a colour to select it. You can pick more than one.

Our range

Everything for your home, inside and out

From our own stock, delivered within 1 to 5 working days. Not sure about a colour? Order a sample first.

Samples from €2

Prefer to see and feel it first? Drop in at the showroom in Oirschot, no appointment needed.

View the showroom
€88.95€109.95You save €21.00