Acoustic panel installation

High Tack mounting adhesive
High Tack mounting adhesive
€10.95
Black Friday€9.31with BF26
You save €1.64Delivered within 1-5 working days
Black screw set - Acoustic panel - 12 pieces
Black screw set - Acoustic panel - 12 pieces
€5.95
Black Friday€5.06with BF26
You save €0.89Delivered within 1-5 working days
Box of black screws - 100 pieces
Box of black screws - 100 pieces
€39.95
€49.95Black Friday€33.96with BF26
You save €15.99Delivered within 1-5 working daysAcoustic panel installation: High Tack adhesive or black screws
To fit an acoustic panel, you choose between High Tack mounting adhesive and black stainless steel screws. Gluing is quick, bonds to most substrates and also works on the ceiling. Screws through the felt give the firmest fixing. If you want to fit acoustic wall panels, allow half a tube of adhesive or 12 screws per panel.
High Tack mounting adhesive: how it works and substrates
High Tack is a one-component MS Polymer-based adhesive with a tensile strength of 2.8 N/mm². Without primer it bonds to concrete, plaster, wood and ceramics, among others, even if the wall is slightly damp. It does not bond to PE and PP. Apply even beads of adhesive to the back of the panel and press it firmly in place. The adhesive cures through the humidity in the air into a permanently elastic rubber.
Screwing through the felt: step by step
The screws are made of black A2 stainless steel, 24 mm long, with a cross head, so the screw does not sink into the PET felt. Mark a line, place the panel against it and check with the spirit level that it is straight. Screw through the felt between two slats, spread over the full height. In brick or concrete, use wall plugs in pre-drilled holes. Stop as soon as the head sits just in the felt, otherwise the felt pulls inwards. With black felt, the heads then disappear from view.
Which pack suits your wall?
Screws come in bags of 12 and boxes of 100, enough for more than eight panels. For a wall of 6 panels you order 3 tubes of adhesive, or 72 screws: 6 bags or 1 box. For an odd number of panels, round the tubes up: 5 panels need 3 tubes.
What buyers say about adhesive and screws
The High Tack mounting adhesive scores an average of 4.6 from 15 reviews. Buyers describe the bond as fast, good and perfect. One buyer who had doubts about adhesive at first was surprised afterwards by how strong it is. Another finds the adhesive rather thick. About the black screws, one buyer writes that they are not noticeable once fitted.
FAQ
How do I order adhesive or screws together with my panels?
Using the calculator on your panel's page. Choose Mounting adhesive or Screws, and the right quantity goes into your basket together with the panels.
Which glue do I use for the end strip?
A thin mounting glue or sealant. High Tack is too thick for this, and end strips cannot take screws.
What is the downside of gluing compared with screwing?
If you remove a glued panel later, adhesive residue will be left on the wall. With screws you do not have that problem.

