Wide-slat acoustic panels

Acoustic wall panel · wide slats (50mm) Classic Oak - 260x60cm
Acoustic wall panel | wide slats (50mm) Classic Oak - 260x60cm
€69.95
€110.00Black Friday€59.46with BF26
You save €50.54Delivered within 1-5 working days
Acoustic wall panel · wide slats (50mm) Walnut - 260x60cm
Acoustic wall panel | wide slats (50mm) Walnut - 260x60cm
€69.95
€110.00Black Friday€59.46with BF26
You save €50.54Delivered within 1-5 working days
Acoustic wall panel · wide slats (50mm) Black Oak - 260x60cm
Acoustic wall panel | wide slats (50mm) Black Oak - 260x60cm
€69.95
€110.00Black Friday€59.46with BF26
You save €50.54Delivered within 1-5 working daysAcoustic wall panels with wide slats: 50 mm slat, 9 mm gap
Acoustic wall panels with wide slats are slat panels with real wood veneer on acoustic felt. They are for anyone who wants to reduce echo and is looking for a slat wall with fewer gaps, because each slat is 50 mm wide. A panel measures 2600 x 600 x 18 mm and covers 1.56 m² of wall. The veneer comes in Classic Oak, Walnut and Black Oak.
What changes compared with narrow slats?
Lay a panel with wide slats next to the standard version and two things stand out. The slat grows from 27 to 50 mm and the gap shrinks from 13 to 9 mm. Length, width and thickness stay the same, as does the construction: 9 mm felt with 9 mm thick slats. You notice the third difference when lifting: 14.8 kg per panel compared with 10 kg for standard slats.
See the colour first with a sample
From 2 euros, sent free of charge, you get a separate sample with a wide slat of each colour. Hold them against the wall, in daylight and lamplight, so you can see how the wide slat works in your space. A Classic Oak buyer finds that the wide slats give the wall a calmer look.
How do you fix the panels?
You can glue the panel, screw it or both. One tube of High Tack mounting adhesive glues two panels. If you screw, put 12 black 24 mm stainless steel screws per panel in the gaps, through the felt. Stop as soon as the screw head sinks into the felt: if you keep turning, you pull the felt inwards.
When do you need an end strip?
If your wall ends freely, you will see protruding felt and the edge of the last slat at the side. Cover that with an end strip in the colour of your panels. You need one for each free end, plus one on every corner where the panels go round. The calculator on the product page includes them. Only once all the panels are up do you stick the profile in place with thin mounting glue or sealant, not with High Tack (too thick) or screws.
FAQ
Which accessories do not fit wide slats?
The LED strips, the wall shelf and the hook only fit standard slats.
Can I use the end strip for the standard panel?
No, that one is 27 mm wide. Wide slats have their own end strip of 50 x 18 mm, in the same three colours.
Do you cut the wide slats to size?
No, there is no cutting service. Use a fine-toothed saw and cut the felt free with a Stanley knife. One buyer of Walnut got a splinter-free cut with a small laminate saw with reverse teeth.

