Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s

Premium wide boards

Premium wide board cladding: a rugged wood effect with 70 mm boards

Premium wide board cladding is composite cladding with 70 mm wide boards. This wood-effect cladding gives your façade, extension or garden building a rugged, bold look, without ever having to paint or impregnate. You choose from Oak + Black and Teak + Black, both colourfast composite with a 10-year manufacturer's guarantee.

How much façade does one panel cover?

A panel measures 2900 x 425 x 25 mm and weighs 9.7 kg. After the overlap, 400 mm of effective width remains, so one panel covers 1.16 m² of façade. The gaps between the boards are 10 mm wide. The composite barely moves: in heat and cold it hardly expands or contracts.

How do you install wide boards?

First, aluminium battens go on the wall, at right angles to the direction of the boards and with 400 to 500 mm between the battens. Then you hook the panels into each other using the patented hook-in system. Each screw sits in a deep recess and disappears completely into the panel. So you see no screws on the outside of your façade.

Oak + Black or Teak + Black?

Both versions combine a wood colour with black. Size, gap width and installation are the same, so you choose purely on colour. The wide boards sample comes in the same two colours and is sent free of charge, from 2 euros per sample. Tick both, hold them at home next to your window frames and roofline and compare them in daylight.

Worked example: a wall of 3 by 2.5 metres

For a wall 3 metres wide and 2.5 metres high with vertical panels, divide 300 cm by 40 cm: rounded up, 8 strips. A panel is 290 cm long, so one panel per strip is enough. With at least 2 spare panels for cutting waste, you order 10. The battens then run horizontally: 6 battens of 3 metres, 18 metres in total.

FAQ

What is the difference from rhombus cladding?

A wide board panel covers 400 mm in width, a rhombus panel 200 mm. So for the same façade you need about half the number of panels. Battens and hook-in installation are the same for both.

Which trims do I need for corners and edges?

On every external corner the premium corner trim, in the same two colours as the panels; the rhombus corner trim does not fit wide boards. Along the visible edges the same aluminium trims fit as for rhombus: the closure trim on battens, the finishing trim without battens.

Do you need more screws for a wide panel?

No. A wide board panel is also fixed with 6 stainless steel screws, just like rhombus. Each corner or closure trim also gets 6, and a box contains 100 screws.