Cladding installation

Aluminium battens for cladding
Aluminium battens for cladding
€14.95
Black Friday€12.71with BF26
You save €2.24Delivered within 1-8 working days
Aluminium battens for cladding - Set of 6
Aluminium battens for cladding - Set of 6
€74.95
Black Friday€63.71with BF26
You save €11.24Delivered within 1-8 working days
Box of cladding screws - 100 pieces
Box of cladding screws - 100 pieces
€12.95
Black Friday€11.01with BF26
You save €1.94Delivered within 1-8 working daysCladding battens and stainless steel screws: the base under your façade
The battens for cladding are an aluminium subframe of 2500 mm battens, which you screw onto the façade at 400 to 500 mm centres. You hook the composite façade panels onto them. You order the battens individually or in sets of 6, and the stainless steel screws in boxes of 100.
Set of 6 or single battens?
A set contains 6 aluminium battens of 2500 mm, 15 metres of battens in total. The single batten is exactly the same batten, so you can combine them with no difference. That way you top up a set if your number does not come out at a multiple of 6. Need more than 40? Then you can request a quote.
Example calculation: a 4 metre wall
Take a wall 4 metres wide and a maximum of 2.5 metres high, with horizontal panels. The battens then stand upright, for example every 500 mm. That gives 8 bays and therefore 9 battens, because there is one at each end: 1 set of 6 plus 3 single battens. For other sizes, the calculator on the cladding page puts panels, battens, screws and trims on your list.
Which screws are in the box?
The box contains 100 stainless steel screws of 4 x 25 mm, with a low dome head and a Pozidriv cross head. They are for the composite façade panels and for every corner, closure or finishing trim: 6 per component, so more than 16 components per box. The box scores an average of 4.65 in 17 reviews; one buyer calls it perfect for quick installation.
How installation on battens works
You can fit a 20 m² façade in one weekend. The battens run across the panels, so horizontal panels get vertical battens. First screw the battens onto the façade, then hook the panels in from bottom to top. The screws disappear out of sight into the panel. Questions about installation? Call or email us for advice.
FAQ
Which trims do I need if I fix onto battens?
Every visible edge gets a 290 cm closure trim, which overlaps the panel by 20 mm and covers the side of the battens over 54 mm. An external corner gets a corner trim. The finishing trim lacks the 25 mm extension and is for installation without battens.
What do I use to fix the battens to the wall?
Use wall plugs and screws from a DIY store that suit your substrate, such as brick, concrete, timber, render or timber frame. The stainless steel screws in the box are for the panels and trims.
How are the battens delivered?
Battens and screws are delivered by XXL Pakket. As soon as your order has been dispatched, you will receive a tracking code.

