Freddy D.
Perfect for quick installation
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Product information
This fixing set consists of 100 stainless steel screws for the composite cladding and the aluminium trims.
About this product
This box of cladding screws contains 100 stainless steel screws for composite cladding panels and the trims that go with them. Each screw is 4 mm thick and 25 mm long, with a low pan head and a Pozidrive cross head. You use six per cladding panel, and also six per corner, closure or finishing trim. So with one box you fix 16 parts and have 4 screws left over.
With the rhombus, you screw each panel to the aluminium battens. Those 2500 mm battens sit on the wall every 400 to 500 mm. The next panel hooks over the screw and covers it. That is why you see no screw heads on the panels.
Add up your panels and trims and multiply by six. Say: 30 cladding panels, 2 corner trims and 2 closure trims. That is 34 parts and 204 screws. Two boxes cover 200, so you order 3. If you enter your walls in the calculator on the cladding page, it adds the boxes automatically.
You use the same screws for the premium wide boards and the shiplap. For the wide boards, the calculator also counts six per panel. With shiplap, one screw goes through the fixing lip along the tongue of the board on each batten. That comes to six to seven screws per board, from the same box as for rhombus.
The box has 17 reviews with an average of 4.65 out of 5 stars. Buyers call it good material that does what it should. One buyer writes that the box is perfect for quick installation, another calls the value for money very good.
Installation
Reviews
Based on 17 reviews
4,65
Excellent
Based on 17 reviews
Freddy D.
Perfect for quick installation
Translated from DutchYves Hoefs
Ghiline Callewaert
Wim Stoof
Homes and gardens with our composite cladding
The questions customers ask us most often about this product.
One buyer describes the screws as self-tapping, but reports that they did not go through the aluminium battens for him. So he pre-drilled all the holes.
Yes. You use them to fix the composite corner trim and the aluminium closure and finishing trims, six per trim.
These screws are for panels and trims. Buy wall plugs and screws for fixing the battens to your wall from a DIY store, suited to your substrate.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.