3 metre acoustic panels

3 metre Acoustic panel · Brown Oak - 300 x 60cm
3 metre Acoustic panel | Brown Oak - 300 x 60cm
€74.95
€94.95Black Friday€63.71with BF26
You save €31.24Delivered within 1-5 working days
3 metre Acoustic panel · Natural Oak - 300 x 60cm
3 metre Acoustic panel | Natural Oak - 300 x 60cm
€74.95
€94.95Black Friday€63.71with BF26
You save €31.24Available from early December
3 metre Acoustic panel · Walnut - 300 x 60cm
3 metre Acoustic panel | Walnut - 300 x 60cm
€88.95
€109.95Black Friday€75.61with BF26
You save €34.34Only 9 left in stock

3 metre Acoustic panel · Classic Oak - brown MDF · 300 x 60cm
3 metre Acoustic panel | Classic Oak - brown MDF | 300 x 60cm
€88.95
€109.95Black Friday€75.61with BF26
You save €34.34Available from mid-February3 metre acoustic panels for walls taller than 260 cm
3 metre acoustic panels measure 300 x 60 cm. Where the standard panel stops at 260 cm, these let you cover a tall wall up to 300 cm in one length, with fewer joins. You choose from four colours of real wood veneer on acoustic felt: Brown Oak, Natural Oak, Walnut and Classic Oak on brown MDF.
When do you choose 300 cm instead of 260 cm?
Up to a wall height of 260 cm, the standard panel is enough. If the wall is taller, with 260 cm panels you need a second panel per 60 cm strip for the part above, with an extra join. If your wall is lower than 300 cm, you cut the 3 metre panel to height with a fine-toothed saw.
High wall and low wall in one colour
All four colours also come in 260 x 60 cm. So you can use 300 cm on the tall wall and 260 cm on the lower walls, in the same wood. Both lengths are 18 mm thick, with 9 mm felt and slats 27 mm wide. The 3 metre panel weighs 11.5 kg, the standard panel 10 kg. For each colour there is an end strip of 3000 and of 2600 mm. The sample covers both lengths: from 2 euros per sample, sent free of charge.
How many 300 cm acoustic panels do you need?
The panels stand upright side by side, so the wall width determines the number: divide it by 60 cm and round up. A wall of 4.20 by 2.90 metres needs 7 panels, 12.6 m² in total. With 5 percent extra, at least 1 panel, the calculator arrives at 8. With 260 cm panels it arrives at 15.
Fitting a 3 metre panel
You glue with High Tack mounting adhesive, half a tube per panel. Screwing is also possible: one bag of 12 black screws per panel, spread over the height. Tighten them until the head just disappears into the felt. You glue the end strip with a thin mounting adhesive or sealant, because High Tack is too thick for it.
FAQ
Do 3 metre panels also help against noise from the neighbours?
Yes, the felt behind the slats absorbs sound waves and so helps reduce noise. Sound also comes in through windows and doors, so do not expect complete soundproofing.
Is there a test report for the acoustics?
Yes. There is a test report on the sound absorption of the felt, which you can download as a PDF.
Can I use 3 metre panels under a canopy?
No. The panels are intended for indoor use and are not suitable for damp rooms such as bathrooms, shower rooms or saunas. For outdoors there is composite cladding.

