René
Good
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits our SPC wall panels.
Product information
For a clean finish at the sides of your wall, use the matt black aluminium end profile. The profile clamps neatly around the side of the first and last panel and hides the cut edge of the SPC material. The result: a professional, seamless finish without sealant or filler.
Available in 2600 mm lengths; saw to size with a hacksaw or metal jigsaw.
About this product
The black SPC end profile is a matt black aluminium profile of 2600 x 20 x 4 mm for the visible sides of a wall with SPC wall panels. You clamp it around the first or last panel, after which the cut edge of the SPC material is out of sight. The wall then ends in a clean black line, without sealant or filler.
Beneath the decor of an SPC panel is a core of stone powder and plastic. When you cut a panel to size, that core is exposed on the cut side. Without a profile, that edge stays visible at the side of the wall. The end profile covers it, so you only see the decor and a narrow black edge.
Allow one end profile per visible end of the wall. A feature wall that ends freely in the room on both sides needs 2. If one side of the wall meets a corner, you need 1. The calculator on the SPC panel pages counts the end profiles for you.
The profile is the same length as an SPC panel. If you shorten the panels to the height of your wall, saw the profile to the same size. You cut the panels themselves with a sharp Stanley knife. For the aluminium profile, use a hacksaw or a metal jigsaw.
Installation
Saw the profile to the height of the wall with a hacksaw or metal jigsaw.
Clamp the profile around the side of the first or last panel.
If you go round a corner, use a 15 × 15 mm aluminium corner profile from a DIY store there.
Reviews
Based on 3 reviews
4,33
Very good
Based on 3 reviews
René
Good
Translated from DutchHnery Lazaroms
jacco
3 photos from 1 review of this panel
Bathrooms and kitchens with our SPC wall panels
The questions customers ask us most often about this product.
No. For SPC there is only this end profile, in matt black. You finish corners with a 15 x 15 mm aluminium corner trim, which you buy yourself at a DIY store.
No. Both sides then end in a corner, and corners do not need an end profile.
Matt. You use it on every SPC wall panel, so next to the gloss Marble colours as well as the matt Natural Stone colours.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.