Ron Intres
Nice but pricey
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits the 260 cm acoustic panels.
The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
Product information
The end strip finishes the side of your acoustic panels. Without an end strip, the protruding felt and the side of the last slat remain visible; the L-profile of the end strip fits neatly over them. That gives your wall a clean, professional look.
The end strip is available in the same wood types as the panels, so the finish continues in colour and texture. The size matches exactly the panel the end strip belongs with.
Please note: The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
About this product
The Black Oak end strip is a solid 2600 × 27 × 18 mm L-profile for the 260 × 60 cm Black Oak acoustic panel. It fits over the felt that sticks out at the side of the panel and over the side of the last slat. So your black slat wall ends with a closed edge, without visible felt.
The names are similar, but each takes a different end strip. The Black Oak panel takes this end strip. Classic Oak with black MDF is a Classic Oak panel. It takes the Classic Oak end strip, as do the versions with brown MDF, cream felt and grey felt. So choose by the wood type in the name of your panel, not by the word black.
The Black Oak panel comes with standard and with wide slats. Both are 260 × 60 cm and 18 mm thick: 9 mm of felt with 9 mm slats on top. Standard slats are 27 mm wide with 13 mm of space between them, and this 27 mm end strip goes with them. Wide slats are 50 mm wide with 9 mm between them and take their own 50 mm end strip. There is no 300 cm Black Oak panel, so there is no 3 metre end strip either.
Say your black slat wall starts in an internal corner and stops halfway along the wall. In the internal corner the panels end against the adjoining wall, so you see no felt there and no end strip is needed. Where the wall stops freely, felt and slat remain in view: one end strip goes there. If your wall goes round a corner, that corner also counts as one end strip. The calculator on the Black Oak panel page includes the end strips automatically.
Installation
First install all the panels and leave the felt protruding at the side.
Apply a thin mounting glue or sealant to the inside of the end strip. Do not use High Tack: that paste is too thick for the end strip.
Slide the L-profile over the protruding felt and the side of the last slat and press it in place.
Reviews
Based on 1 review
5,00
Excellent
Based on 1 review
Ron Intres
Nice but pricey
Translated from DutchCustomer projects with our acoustic panels
The questions customers ask us most often about this product.
Yes. The Black Oak end strip has the same wood veneer and the same colour as the Black Oak panel. It is 18 mm high, exactly as high as the panel is thick. Before gluing, just place it next to a panel.
No, and you do not need them: end strips cannot take screws. You glue it with a thin mounting glue or sealant on the inside of the L-profile. High Tack is too thick for the end strip.
Email [email protected] with your name, your order number and which end strips are missing. Leno Deco aims to respond to a complaint within 2 working days.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.