End strip · acoustic panel finishing
End strip - Acoustic panel - Walnut - Wide slats
4,851,658 reviewsOnly during Black Friday. Code BF26: 15% extra off everything.
- Gives the side of your panels a clean finish
- Same wood types as the panels
- Glue it, no screws needed
- Delivered from our own stock
Fits
Fits the 260 cm acoustic panels with wide slats.
The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
Product information
End strip - Acoustic panel - Walnut - Wide slats
The end strip finishes the side of your acoustic panels. Without an end strip, the protruding felt and the side of the last slat remain visible; the L-profile of the end strip fits neatly over them. That gives your wall a clean, professional look.
The end strip is available in the same wood types as the panels, so the finish continues in colour and texture. The size matches exactly the panel the end strip belongs with.
Technical data
- Length
- 2600 mm
- Width
- 50 mm
- Height
- 18 mm
- Wood type
- Walnut
Please note: The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
About this product
End strip Walnut wide slats for the wall with 50 mm slats
The Walnut wide slats end strip is the finishing trim for the 260 x 60 cm Walnut acoustic wall panel with wide slats. This solid L-profile measures 2600 x 50 x 18 mm. That makes it exactly as wide as one wide slat. You glue it to the wall as the last step, after all the panels are up.
Wide Walnut slats on your wall? Then this is your end strip
On the wall, you recognise this panel by the 50 mm wide Walnut slats. That gives a calmer look with fewer gaps than a wall with narrow slats. Under those slats is a single layer of felt. Slat and felt are each 9 mm thick, 18 mm in total. That 18 mm is also the height of this end strip, so it is exactly as high as your panel.
Three end strips in Walnut: check the name
In Walnut there are three end strips, one per panel type. The one for the 3 metre panel is easy to recognise: it is 3000 mm long. The other two are both 2600 mm long and 18 mm high. Only the width differs: 27 mm for the standard panel, 50 mm for wide slats. So you cannot tell them apart by length. That is why you should check that Wide slats is in the product name before you order.
The calculator puts this end strip on your list
If you calculate on the page of the Walnut panel with wide slats, you tick for each wall whether the left and right ends stay in view. If the panels turn a corner, you switch that on too. The calculator then picks this Walnut wide slats end strip itself, not the narrow version. That way you order panels and end strips in one go.
Installation
How to fit the end strip
- 1
First install all the panels and leave the felt protruding at the side.
- 2
Apply a thin mounting glue or sealant to the inside of the end strip. Do not use High Tack: that paste is too thick for the end strip.
- 3
Slide the L-profile over the protruding felt and the side of the last slat and press it in place.
How many you need
- One end strip per visible end of the wall.
- If the panels go round a corner, one end strip goes there too.
- End strips cannot take screws; gluing is the way to fix them.
Reviews
What our customers say
Based on 1,658 reviews
Our panels in real life
Customer projects with our acoustic panels
FAQ
The questions customers ask us most often about this product.
That sometimes happens. The end strip comes in the same wood type as the panel, but in reviews of end strips three buyers still mention a colour difference. Two others write that the colour matches exactly, so hold it loosely against your wall first before you fix it.
Yes, the end strip is sold per piece, so a single one is possible too. Within the Netherlands and Belgium you do pay the fixed delivery charge again, as it applies per order.
There is 9 mm between the wide slats. On the standard panel and the 3 metre panel in Walnut it is 13 mm. If you measure 9 mm between two slats, you have wide slats and this end strip fits.
Delivery, collection and returns
This is how this product reaches you, and how collection by appointment works.
Delivery
- Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
- If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
- Delivery time: 1 to 5 working days, provided the product is in stock.
- Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.
Collection
- Collection is possible in Oirschot, by appointment only.
- Collection point: showroom De Stad 1, Oirschot (acoustic panels in small quantities and accessories).
- Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.
Returns
The full returns policy is in our terms and conditions.






