Martien Jansen
Good quality
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits the 260 cm acoustic panels.
The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
Product information
The end strip finishes the side of your acoustic panels. Without an end strip, the protruding felt and the side of the last slat remain visible; the L-profile of the end strip fits neatly over them. That gives your wall a clean, professional look.
The end strip is available in the same wood types as the panels, so the finish continues in colour and texture. The size matches exactly the panel the end strip belongs with.
Please note: The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
About this product
The Walnut end strip finishes the open side of a wall with 260 × 60 cm Walnut acoustic panels. The L-profile fits over the felt that sticks out at the side and over the side of the last slat. So your wall ends in the same wood type as the panels. You glue the end strip in place; screws cannot go into it.
This end strip is 2600 mm long, 27 mm wide and 18 mm high. Those are exactly the length, slat width and thickness of the 260 × 60 cm Walnut panel, which consists of 9 mm of felt with 9 mm slats on top. Walnut also comes as a 3 metre panel and with 50 mm wide slats. If you measure a length of 3000 mm or a slat width of 50 mm, a different Walnut end strip goes with it.
If your Walnut slat wall hangs freely on a wall, for example as a TV wall or as a headboard in the bedroom, the sides remain open on the left and right. You then order two end strips. An end strip is the same length as the panel, so you finish each side with one piece. If the wall runs up to a side wall on one side, one end strip is enough. If the wall goes round a corner somewhere, add one end strip for it.
The Walnut end strip has 5 reviews with an average of 4.4 stars. Buyers call it a neat finishing strip or decorative trim, a good product and of good quality. One of them writes that it does exactly what it should: finish off the wall panels on the wall nicely. One review reports some colour difference between the end strips and the panels.
Installation
First install all the panels and leave the felt protruding at the side.
Apply a thin mounting glue or sealant to the inside of the end strip. Do not use High Tack: that paste is too thick for the end strip.
Slide the L-profile over the protruding felt and the side of the last slat and press it in place.
Reviews
Based on 5 reviews
4,40
Very good
Based on 5 reviews
Martien Jansen
Good quality
Translated from DutchWeener De Graaff
Neat finishing strip/decorative trim
Translated from DutchX
Good product
Translated from DutchJGH Verheijen
There's a bit of a color difference between the end strips and the panels
Translated from DutchCustomer projects with our acoustic panels
The questions customers ask us most often about this product.
Yes. Within 14 days of receipt you can withdraw from the purchase without giving a reason: email [email protected] or reply to your order confirmation. The cost of returning it is yours. So judge the colour before gluing.
Email your name, your order number and what is missing to [email protected]. Customer service is available on working days from 10:00 to 16:00.
No. The acoustic panels and their end strips are intended for indoor use. For outdoors there is composite cladding, which in Walnut has its own closure trim and finishing trim.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.