Anneke
Shipping and delivery good and smooth. Return of the end slats also went without problems.
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits the 260 cm acoustic panels.
The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
Product information
The end strip finishes the side of your acoustic panels. Without an end strip, the protruding felt and the side of the last slat remain visible; the L-profile of the end strip fits neatly over them. That gives your wall a clean, professional look.
The end strip is available in the same wood types as the panels, so the finish continues in colour and texture. The size matches exactly the panel the end strip belongs with.
Please note: The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
About this product
The Rustic Oak end strip is a 2600 × 27 × 18 mm L-profile that finishes the open side of a wall with Rustic Oak acoustic panels. You need it on every side that stays in view, including where the panels turn a corner. There the felt sticks out next to the last slat. The profile fits over that felt and the side of that slat.
With Classic Oak and Walnut, you first need to know which panel you have: 260 cm, 300 cm or wide slats, each with its own end strip. With Rustic Oak you do not need to check. This panel only comes in 260 × 60 cm and is 18 mm thick: 9 mm of felt with 9 mm slats. The end strip is exactly as long and as high. There is no 300 cm Rustic Oak end strip or one for wide slats.
The end strip has the same wood veneer and the same colour as the Rustic Oak panel, so colour and texture continue right up to the edge. Even so, buyers sometimes see some colour difference between end strips and their panels. So place the end strip loosely against your wall before you apply sealant, in the daylight of your own room. That way you know how it looks before gluing.
First hang all the Rustic Oak panels and let the felt stick out on the open side. Then apply a thin mounting adhesive or sealant to the inside of the end strip. High Tack is too thick for this. Slide the profile over the edge and press it on. Screws cannot go into the end strip, so you always glue it.
Installation
First install all the panels and leave the felt protruding at the side.
Apply a thin mounting glue or sealant to the inside of the end strip. Do not use High Tack: that paste is too thick for the end strip.
Slide the L-profile over the protruding felt and the side of the last slat and press it in place.
Reviews
Based on 1,658 reviews
Anneke
Shipping and delivery good and smooth. Return of the end slats also went without problems.
Translated from DutchCustomer projects with our acoustic panels
The questions customers ask us most often about this product.
If the end strip is in stock, it is delivered from our own stock and you will have it within 1 to 5 working days. The same delivery time applies to the Rustic Oak panel, so you order them together.
Report it by email to [email protected] and give your name, your order number and how many end strips are missing. Leno Deco tries to reply within 2 working days. You do not need to wait to start hanging, because the end strip only goes on last.
Yes, by appointment. At the showroom at De Stad 1 in Oirschot you can collect accessories and small quantities of acoustic panels. At checkout choose Collection by appointment and call +31 (0)499 700 277 1 working day in advance.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.