Edwin Rombouts
A bit of color difference, we've now done it without the end strip, which is also fine in our case
Translated from DutchOnly 18 left in stock
Only during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits the 260 cm acoustic panels.
The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
Product information
The end strip finishes the side of your acoustic panels. Without an end strip, the protruding felt and the side of the last slat remain visible; the L-profile of the end strip fits neatly over them. That gives your wall a clean, professional look.
The end strip is available in the same wood types as the panels, so the finish continues in colour and texture. The size matches exactly the panel the end strip belongs with.
Please note: The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
About this product
The Classic Oak end strip is the L-profile that finishes the open side of a Classic Oak slat wall. It fits all four 260 × 60 cm panel versions: with brown MDF, black MDF, cream felt or grey felt. The profile measures 2600 × 27 × 18 mm and fits over the protruding felt and the side of the last slat.
The four versions differ in the colour of the MDF or felt, not in size. Each panel is 2600 × 600 × 18 mm, with 9 mm of felt and slats 9 mm thick and 27 mm wide. The height of an end strip must match the thickness of the panel, and this end strip is 18 mm high. Because the L-profile fits over the protruding felt, it finishes the end in Classic Oak. That applies to cream felt just as much as to grey felt.
The Classic Oak panel with wide slats is also 18 mm thick, but its slats are 50 mm wide instead of 27 mm. The width of the end strip follows that of the slats. So for that panel there is the Classic Oak wide slats end strip of 50 × 18 mm. You recognise that panel by its product name: it includes wide slats (50 mm).
The Classic Oak end strip has 4 reviews with an average of 4.5 stars. One buyer calls the quality good and the look beautiful, another finds it as expected. A third finds it beautiful, but relatively pricey. The fourth noticed some colour difference with the panels and finished the wall without an end strip. So when unpacking, place the strip next to your panels before you glue.
Installation
First install all the panels and leave the felt protruding at the side.
Apply a thin mounting glue or sealant to the inside of the end strip. Do not use High Tack: that paste is too thick for the end strip.
Slide the L-profile over the protruding felt and the side of the last slat and press it in place.
Reviews
Based on 4 reviews
4,50
Excellent
Based on 4 reviews
Edwin Rombouts
A bit of color difference, we've now done it without the end strip, which is also fine in our case
Translated from DutchE.W. Blok
good quality and a nice look
Translated from DutchRon Intres
Nice but relatively a bit pricey
Translated from DutchM. vd Velde
As expected
Translated from DutchCustomer projects with our acoustic panels
The questions customers ask us most often about this product.
Then you need the 300 cm Classic Oak end strip. It measures 3000 × 27 × 18 mm: the same width and height as this one, but 40 cm longer. This 2600 mm end strip is for the 260 cm panels.
No. Black Oak has its own Black Oak end strip. This end strip goes with the Classic Oak panels, so it does fit Classic Oak with black MDF.
Take photos straight away and email them within 2 working days to [email protected]. A solution will then be found for you.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.