Lita Sinie
Quality is good, exactly as described on the site
Translated from DutchOnly during Black Friday. Code BF26: 15% extra off everything.
Fits
Fits the 260 cm acoustic panels.
The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
Product information
The end strip finishes the side of your acoustic panels. Without an end strip, the protruding felt and the side of the last slat remain visible; the L-profile of the end strip fits neatly over them. That gives your wall a clean, professional look.
The end strip is available in the same wood types as the panels, so the finish continues in colour and texture. The size matches exactly the panel the end strip belongs with.
Please note: The height of the end strip must match the thickness of your panel. Check which panel type you have before you order.
About this product
The Grey Anthracite end strip is a solid L-profile of 2600 × 27 × 18 mm for the 260 × 60 cm Grey Anthracite acoustic panel. Without an end strip, you see the protruding felt and the side of the last slat at the end of your wall. The L-profile fits over both, so the edge of your wall has a clean finish.
The end strip has the same wood veneer and the same colour as the Grey Anthracite panel, which has real wood veneer on every slat. This end strip has 2 reviews, both 5 stars. One buyer calls the quality good and exactly as described on the site, the other calls it high. Not sure whether the grey goes with your floor and furniture? Then order a sample of the panel first: from 2 euros per sample, delivered free.
Allow one end strip per visible end of your wall. If the panels turn a corner, one end strip goes there too. If your wall ends free on both sides, you need two. The calculator on the Grey Anthracite panel page automatically includes the end strips. If you find you are one short later, you can order it separately per piece. It comes from our own stock and arrives within 1 to 5 working days, provided it is in stock. Need more than 40? Request a quote.
The height of an end strip must match the thickness of your panel. The Grey Anthracite panel is 18 mm thick and has slats 27 mm wide. This end strip is 18 mm high, 27 mm wide and 2600 mm long, the same length as the panel. Other end strips sometimes have a different size: for Mocha and the 3-sided Naturel Oak it is 21 mm high, for panels with wide slats 50 mm wide and for 300 cm panels 3000 mm long.
Installation
First install all the panels and leave the felt protruding at the side.
Apply a thin mounting glue or sealant to the inside of the end strip. Do not use High Tack: that paste is too thick for the end strip.
Slide the L-profile over the protruding felt and the side of the last slat and press it in place.
Reviews
Based on 2 reviews
5,00
Excellent
Based on 2 reviews
Lita Sinie
Quality is good, exactly as described on the site
Translated from DutchRashied
High quality
Translated from DutchCustomer projects with our acoustic panels
The questions customers ask us most often about this product.
No, screws cannot go into the end strip. You glue it with a thin mounting adhesive or sealant on the inside of the L-profile. Do not use High Tack, because that paste is too thick for the end strip.
Yes, that is the order: first you hang all the panels, then the end strip goes on. Let the felt stick out slightly on the open side, because that is where you slide the L-profile over it and press it on.
There is 13 mm between two slats. On the panels with wide slats it is 9 mm.
This is how this product reaches you, and how collection by appointment works.
The full returns policy is in our terms and conditions.