Black Friday: up to −50% on walls and façades with code BF26, only during Black Friday.

Black Friday
Ends in--d--h--m--s

Installation · aluminium mounting profile for decor panels

Decor panel - Aluminium mounting profile

black
4,851,658 reviews
Black Friday−14%
€16.11incl. VATyou save €2.84€18.95 − 15% extra with BF26
Ends in--days--hrs--min--sec

Only during Black Friday. Code BF26: 15% extra off everything.

Delivered within 1-5 working daysIn stock
  • Black aluminium
  • For the ends of the wall
  • Optional between the panels
  • Easy to install yourself

Fits

Fits our decor panels.

Lowest price guarantee
Delivered from our own stock
Easy to install yourself

Product information

Decor panel - Aluminium mounting profile

The black aluminium mounting profile finishes the ends of a wall with decor panels. You can also place the profile between the panels if you want a visible strip between them.

Technical data

Material
Aluminium
Colour
Black

About this product

Black decor panel mounting profile: click in without adhesive or finish the edge

The black decor panel mounting profile is an aluminium profile for walls with WPC decor panels. On every visible end, it gives the wall a neat finish. If you also put a profile in every join, you click the decor panels onto the wall without adhesive. So you use one product for both the finish and the fixing.

  • A black line or one even surface?

    You decide that with the installation method. If you click the decor panels into the mounting profile, a black dividing line runs between the panels. That creates a pattern of lines across the wall. If you glue the panels with High Tack mounting adhesive, you place them tightly against each other. That creates an even surface without visible joins, and the profile only goes on the visible ends.

  • How do you install with the profile?

    You screw the aluminium profiles to the wall and click the decor panels into them. The wall must be flat, clean and dry. That requirement also applies if you glue the panels. Check panels and profiles for damage before you start. For installed panels, a charge for loss of value may apply.

  • How many profiles do you need?

    Allow one profile per visible end of the wall. If you click the panels into profiles, add one per join. Take a wall five panels wide and one panel height high, with two free sides. With adhesive you order 2 profiles, with the click method 2 plus 4, 6 in total. If you turn a corner, use a 15 by 15 millimetre aluminium corner trim from the DIY store. For a taller wall, the calculator on the page of each decor panel works out the number.

Installation

How to use the mounting profile

  1. 1

    Place a profile on every visible end of the wall.

  2. 2

    If you want a strip between the panels, also place a profile between every two panels.

  3. 3

    If you go round a corner, use a 15 × 15 mm aluminium corner profile from a DIY store there.

How many you need

  • One profile per visible end of the wall.
  • Optionally one profile between every two panels.

Reviews

What our customers say

4,85Excellent

Based on 1,658 reviews

Our wall panels in real life

Bathrooms and kitchens with our SPC wall panels

FAQ

The questions customers ask us most often about this product.

Yes, all four: Pure Oak, Highland Oak, Diamond Grey and Copper Oxide. Because the profile only comes in black, you get a black edge or line with every colour.

Yes. Panels clicked into the mounting profile can be removed again later. That is an advantage of the profile over gluing with adhesive.

For SPC wall panels there is a separate SPC aluminium end profile in matt black, which clamps around the side of the first or last panel. This mounting profile fits the decor panels.

One per visible end of the wall. If you want a strip between the panels, add one profile per join. The calculator on the decor panel page has a switch for that.

There you use a 15 × 15 mm aluminium corner profile from a DIY store; we do not sell those.

Delivery, collection and returns

This is how this product reaches you, and how collection by appointment works.

Delivery

  • Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
  • If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
  • Delivery time: 1 to 5 working days, provided the product is in stock.
  • Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.

Collection

  • Collection is possible in Aalsmeer, by appointment only.
  • Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
  • Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.

Returns

The full returns policy is in our terms and conditions.

Please note: check your order for damage before you start installing. We may charge for loss of value on panels that have been installed.