Only during Black Friday. Code BF26: 15% extra off everything.
- Closes off the space above the battens
- Overlaps the panel by 20 mm
- Aluminium, 2900 mm long
- Same colours as the cladding
Fits
Fits the 290 × 20 cm rhombus cladding and the 290 × 40 cm premium cladding with wide boards.
The trims are made of aluminium and the cladding of composite. Those are two different materials, so the colour may differ slightly. The incidence of light and the texture of the surface also play a part. If you want to be sure how the combination looks, order a sample of both.
Product information
Closure trim Cladding Teak
The closure trim closes off the space between the façade and the cladding at the point where the aluminium battens would otherwise stay visible. At the front, the trim overlaps the panel by 20 mm and at the side it closes off over a total width of 54 mm.
Use this trim when you install the cladding on aluminium battens. It is specially designed to blend in with our composite cladding.
Fixing onto aluminium battens? Choose the closure trim.
Fixing without battens? Choose the finishing trim.

Technical data
- Length
- 2900 mm
- Colour
- Teak
- Material
- Aluminium
- Front overlap
- 20 mm
- Total side closure
- 54 mm
Please note: The trims are made of aluminium and the cladding of composite. Those are two different materials, so the colour may differ slightly. The incidence of light and the texture of the surface also play a part. If you want to be sure how the combination looks, order a sample of both.
About this product
Teak cladding closure trim for the teak rhombus and Teak + Black
The teak cladding closure trim is a 2900 mm aluminium edge trim in teak, for composite cladding on aluminium battens. On an open edge it closes off the space between the wall and the cladding, so the battens stay out of sight. It fits the 290 × 20 cm rhombus and the 290 × 40 cm premium wide boards.
On battens or without: which teak trim should you choose?
The trim has a 25 mm aluminium extension that covers the battens at the edge. At the front it overlaps the panel by 20 mm, and at the side it closes off a total width of 54 mm. If your teak cladding is fitted directly to the wall without battens, choose the teak finishing trim. That is the same trim without the extension.
Teak rhombus or Teak + Black: which edge colour?
For the single-colour teak rhombus, this is the closure trim with the same colour name. Teak + Black comes as rhombus and as premium wide boards. There, black is the standard edge colour, but this teak trim fits both. So you choose whether the edge follows the wood colour or the black of the panel. There are no dedicated closure trims for teak shiplap; we advise on each situation.
Worked example: a teak façade higher than 290 cm
A trim is 290 cm long. Take a teak façade 400 cm wide and 320 cm high, with two open sides and a visible top edge. Each side then needs two trims, because 320 cm is higher than one trim. The top edge does too, because 400 cm is wider. Six trims in total. They go on last, after the panels, with six stainless steel screws each: 36 screws.
Installation
How to fit the closure trim
- 1
Install the cladding on the aluminium battens.
- 2
Place the closure trim over the edge: the front overlaps the panel by 20 mm, the side closes off the battens.
- 3
Screw the trim in place with the stainless steel cladding screws, six per trim.
How many you need
- One trim per visible edge of 290 cm.
- Six screws per profile.
Reviews
What our customers say
Based on 1,658 reviews
Our cladding in real life
Homes and gardens with our composite cladding
FAQ
The questions customers ask us most often about this product.
Order a sample of the trim and of the panel and put them side by side. The trim is aluminium and the panel composite, so the shade may differ slightly. The incidence of light and the texture of the surface also play a part.
A corner trim in the colour of your panels, not a closure trim. With the Teak + Black wide boards that is the premium corner trim. The closure trim is only for the edges where the façade ends.
On the page for your teak façade panels, via the Work it out here link. You enter the dimensions of your walls and get panels, battens, screws, corner and closure trims in one list, with cutting waste included.
Delivery, collection and returns
This is how this product reaches you, and how collection by appointment works.
Delivery
- Netherlands and Belgium: €39.95 delivery per order, whatever the order size.
- If you order this together with cladding or other products with higher delivery charges, you only pay the highest delivery charge for the whole order.
- Delivery time: 1 to 8 working days, provided the product is in stock.
- Large items are delivered by XXL Pakket. You will receive a tracking code as soon as your order has been dispatched.
Collection
- Collection is possible in Aalsmeer, by appointment only.
- Collection point: XXL Pakket warehouse, Rietwijkeroordweg 22, unit 14/15, Aalsmeer (working days 10am to 4pm).
- Choose "Collection by appointment" at checkout and call us 1 working day in advance on +31 (0)499 700 277 to schedule the appointment.
Returns
The full returns policy is in our terms and conditions.






